Hello, welcome to Chongqing Bozhang Electromechanical Equipment Co., Ltd.

CN  |  EN

博张机电
博张机电

Hotline:

023-85290822

企业服务

Products

Sell products such as solid alkali set equipment and high-end pumps

Nickel Drum

  • Product description
  • 镍转鼓
    镍转鼓
    It can be used for the production of flake materials such as caustic soda, potassium alkali, sulfur and phthalic anhydride. The materials of drums can be nickel, stainless steel and heat resistant steel. The nickel plate used in the production of flaker nickel drum is Ni6 wide plate, which meets the standard of GB/T 2054-2005, M state. The thickness of the plate depends on the size of machine type. The width of the plate is not less than the height of the drum, and the length of the plate is not less than the circumference of the drum. Except for the two ends of the drum, there is only one weld in the axial direction. The weld is inspected by 100% X-ray according to standard of JB4730-2005 . It is qualified at RT-II level or above, and 0.1 MPa pressure test is carried out to ensure no leakage. The surface is polished to improve the surface hardness and roughness of the drum, as well as the wear resistance and service life of the drum.
      It can be used for the production of flake materials such as caustic soda, potassium alkali, sulfur and phthalic anhydride. The materials of drums can be nickel, stainless steel and heat resistant steel.
      The nickel plate used in the production of flaker nickel drum is Ni6 wide plate, which meets the  standard of GB/T 2054-2005, M state. The thickness of the plate depends on the size of machine type. The width of the plate is not less than the height of the drum, and the length of the plate is not less than the circumference of the drum. Except for the two ends of the drum, there is only one weld in  the axial direction. The weld is inspected by 100% X-ray according to standard of JB4730-2005 . It is qualified at RT-II level or above, and 0.1 MPa pressure test is carried out to ensure no leakage. The surface is polished to improve the surface hardness and roughness of the drum, as well as the wear resistance and service life of the drum.
     
  • We could not find any corresponding parameters, please add them to the properties table

news

PRODUCTS

博张机电

About     News     Products     Case     Technology     Epc     Service

 

Factory address:Hexi street,Qinggang road,Qinggang town,Bishan district,Chongqing,China
Company address:Number 281-6,Xiaolongkan street,Shapingba districe,Chongqing,China

Tel:023-85290822    023-65350931

Fax:023-85290824    023-65420705

博张机电

Focus on WeChat

© 2020 Chongqing Bozhang Electromechanical Equipment Co., Ltd. All rights reserved 渝ICP备2020093746号 Powered By: www.300.cn